spangle Transfer

✨ Spangle Transfer Pressing Instructions ✨

• Temperature: 320°F–330°F (160°C–166°C)
• Pressure: Medium to Firm
• Press Time: 15–20 seconds
• Cover Sheet: Use parchment paper or a Teflon sheet over the transfer while pressing.
• Peel: Warm peel (allow a few seconds to cool, then remove the carrier).
• Optional Finishing Press: Cover again with parchment or a Teflon sheet and press for an additional 3–5 seconds to help set the spangles.

Care Instructions:

• Wait 24 hours before washing.
• Wash inside out in cold water on a gentle cycle.
• Do not use bleach.
• Tumble dry on low or hang dry.
• Do not iron directly on the spangle design.
• Do not dry clean.

Tip: Avoid over-pressing or using excessive heat, as it can dull the shine of the spangles or affect the adhesive.